CondoCell™
The CondoCell™ System
Each of our unique solutions may be utilized separately or in conjunction with one another to improve results, based on the needs of your research
Mitigate the risk of cross contamination between cultures and from room air particulates. Allows for limited transport to/from an incubator or workstation while maintaining the culture environment
Clear lid and base allows up to 20X microscopy without disrupting the culture environment
Increased productivity – researchers can now co-work within a single workstation
Filtered, protected and contained environment
Easy to clean and sterilize
Rapid Purge Unit (RPU)
- Reduces oxygen concentration in a Condo
- Mass: 600g
- Mains Power: 3W
- Mains Supply: 100-240 VAC 50/60Hz
- Reduce to 1% O2 in less than 1 minute
- Dimensions: 125 x 170 x 115 mm (H x W x D)
Contaminant-free and controlled, air-tight culture vessel
- Mass: 1.6kg
- 1x T75 Flask
- Up to 6x T25 Flask
- Up to 3x 90 mm Cell Culture Dish
- Up to 3x 96 Well Plate*
- Up to 2x 12 Well Plate* [based on typical culturing vessels]
- External dimensions: 65 x 150 x 278 mm (H x W x D)
- Internal dimensions: 53 x 105 x 180 mm (H x W x D)
Atmosphere Circulation Unit (ACU)
- Breathes and distributes the culture environment to the Condos.
- Mass: 1.1kg
- Door timer delay: 0-60 minutes
- Mains Power: 8W
- Incubator Door Sensors: up to 4
- Mains Supply: 100-240 VAC 50/60Hz
- Flow rate: 20 mL/minute
- Volume exchange rate: 1 exchange per hour
- Dimensions: 60 x 238 x 228 mm (H x W x D)
AeroPROTECT 360°
Performs like a biosafety cabinet
AeroPROTECT 360° features a series of four biocontainment enclosures designed specifically to house robotics systems, such as automatic liquid handlers.
AeroPROTECT 360° is uniquely designed to provide the best protection from aerosols and particulates associated with the use of automatic liquid handling systems. All exhausted air is completely HEPA filtered. In addition, the interior of the enclosure is completely bathed in unidirectional, non-turbulent HEPA filtered air, offering product protection and an aseptic work environment. Microbiologically aerosol tested to Baker’s rigorous standards to ensure optimal containment and protection, providing the performance you should expect from a biosafety cabinet.
Multiple 8” (203mm) sliding sashes allow access to the work surface and is the primary means of access to ensure user protection.
Durable view screen for the clearest view, made of scratch proof mar resistant polycarbonate materials.
Top hinged front view screen and rear access, offering easy equipment loading.
Clear visibility into the work area from all sides for easy monitoring.
Meets or exceeds NSF international standard 49 microbiological testing requirements
8”(203mm) sash opening allows easy access to the work surface during operation.
Modular, non-recirculating design is easy to install
Ships disassembled and all components fit through standard doorways, and no HVAC connection required.
Adapts to your application
Multiple sizes available to properly enclose your application and workflow, with multiple electrical outlets and cable ports where you need them.